Nortel Networks MOTOROLA BRUTE I680 - Manual (Page 82)

72 6. Settings
Ring and Vibrate
To set your phone to ring and vibrate when you receive
phone calls or Call Alerts:
1. Press / > Multimedia > Ring Tones .
2. Make sure Vibrate All is set to Off .
3. Scroll through the list and select a ring tone.
4. Press / > Assign w/Vibe .
5. Select Phone Line 1 and/or Phone Line 2 and press
Done (left softkey).
This icon / appears on the display.
Silence All
The Silence All option allows you to mute all sounds
without turning your phone off.
To activate Silence All:
ᮣ With the phone in standby mode press and hold
the volume key down until the ringer level is set
at 0. (The screen will display ,
. )
To deactivate Silence All:
ᮣ Press the volume key up repeatedly to select a
volume level.
To set your phone to vibrate instead of making a sound for
some features but not others:
1. Press / > Multimedia > Ring Tones .
2. Make sure Vibrate All is set to Off .
3. Select Vibrate from the list of ring tones.
4. Select the feature(s) to which to assign Vibrate and
press
Done (left softkey).
/ The phone vibrates then rings for all calls.
, The ring volume is set to zero for all calls.
Note: You can also set 3D sound effects settings in the Ring
Tones menu (/ >
Multimedia > Ring Tones > 3D
Effect ) or when assigning a ring tone.
Note: To set ring options for Direct Connect calls, Group
Connect calls, and Talkgroup calls, see “Vibrate
Settings” on page 71.