Eizo CG221 - Manual (Page 14)

Signal Cable Connector PC
Signal Cable (FD-C39
enclosed) +ADC-DVI
display adapter
(commercially available) Video Output
Connector / ADC
Input Connector
(monitor) / DVI Power Mac G4 / G5(ADC)
* ADC-DVI display adapter is required if the monitor connects to Power Mac G4 /
G5. The adapter is commercially available.
2.Plug the power cord into the power connector on the rear of the
monitor.
3.Close the cable cover and lead the power cord and signal cable
into the cable holder at rear of the monitor.
* The cables are recommended to lead with slight sag for the smooth motion of
the stand.
* It's recommended to put away the signal cables into the left cable holder, and
the USB cable and power cord into the right cable holder.