Eizo CG221 - Manual (Page 18)

(EX.4) Digital DVI-D
Signal Cable (FD-
C39 enclosed) Signal Cable FD-C16
enclosed)
D-Sub
mini 15
pin
Analog
(EX.5) Digital DVI-D
Signal Cable (FD-
C39 enclosed) Signal Cable (FD-
C16 enclosed)+
Adapter*
D-Sub
15 pin
Analog
(EX.6) Analog
D-Sub
mini 15
pin
Signal Cable (FD-
C16 enclosed) Signal Cable (FD-
C16 enclosed)
+Adapter*
D-Sub
15 pin
Analog
*Macintosh Adapter (Optional)
Selecting the Active Input
The Input Signal Selection switch on the control panel can be used to select either
SIGNAL 1 or SIGNAL 2 as the active input at any time. Every time the switch is
touched, the input changes. When switching the signal, the kind of the input signal
(Signal 1 or 2/ Analog or Digital) is displayed for a few seconds on the right top corner
of the screen.