Setting up your keyboard and mouse – Nortel Networks AKM9600/8 User Manual

Page 8

Advertising
background image

Keyboard

1.Turn the keyboard over.

2.Open the battery compartment. Slide

the cover in the direction of the arrows.

3.Insert two AA batteries into the

compartment. Ensure that you orient
the batteries according to the
polarity markings inside the battery
compartment.

4.Replace the battery compartment

cover.

Your R F keyboard and mouse connect to the PS/2 keyboard and mouse ports on
your computer.

Setting up Your Keyboard and Mouse

Note! Insert the keyboard and mouse batteries before setting
up the keyboard and mouse. Refer to the previous section.

Refer to the following instructions and illustrations to connect the keyboard and
mouse to your PC:

1.Turn off your computer.

2.Plug the purple PS/2 connector on

the R F receiver cable into the PS/2
keyboard port on your computer.

3.Plug the green PS/2 connector on

the RF receiver cable into the PS/2
mouse port on your computer.

5

Advertising