Numark Industries KMX01 - Manual (Page 2)

2
QUICK SETUP
1. Make sure all items listed on the
front of this guide are included in the
box.
2. READ SAFETY INSTRUCTION
BOOKLET BEFORE USING THE
PRODUCT.
3. Study this setup diagram.
4. Place mix station in an appropriate
position for operation.
5. Make sure all devices are turned off
and all faders and gain knobs are set
to “zero”
6. Connect all stereo input sources as
indicated in the diagram.
7. Connect the stereo outputs to power
amplifier(s), tape decks, and/or other
audio sources.
8. Plug all devices into AC power.
9. Switch everything on in the following
order.
• audio input sources (i.e.
turntables or CD players)
• KMX01
• last, any amplifiers or output
devices
10. When turning off, always reverse this
operation by,
• turning off amplifiers
• KMX01
• last, any input devices
11. Go to http://www.numark.com for
product registration.
More information about this product
may be found at
http://www.numark.com