Numark Industries KMX01 - Manual (Page 6)

6
started. Steady lighting of this LED
indicates the ready condition.
13. START/PAUSE (Play/Pause Button)
- Each press of the Play/Pause Button
causes the operation to change from
play to pause or from pause to play.
14. BPM/PITCH BUTTON - Switches the
mode of the display between showing
the BPM and the percentage change in
pitch.
15. TAP BUTTON - Tap this button with
the beat of the music to determine the
current Beats Per Minute (BPM).
LCD DISPLAY FEATURES
1. PLAY: Active while the unit is
actually playing a CD.
2. PAUSE: Active when the unit is
paused.
3. CUE: Flashing when the unit is
setting a cue point. Lit continuously
when the unit is paused at a cue
point.
4. PROGRAM: Used for pre-
programming the track order to
automatically be played by the unit.
This is a great function if you need to
leave the CD player alone.
5. TIME MODE: (Elapsed) is for
showing time as it is taking
place.(Remain) shows how much
time is left on a particular track. This
function is controlled by the TIME
BUTTON.
6. SINGLE: Shows when the unit is set
to play just one track at a time.
When this is not lit, the CD will play
continuously through all tracks. This
function is controlled by the
SING/CONT BUTTON.
7. PITCH: Is lit when the PITCH
BUTTON is active.
8. TIME BAR: Shows either time
remaining or elapsed depending on
the setting of the TIME BUTTON.
9. PITCH/BPM: Shows the percentage
change in pitch or current BPM.
10. TRACK: Shows the current track
that the unit is playing.
11. MINUTES: Shows the minutes
elapsed or remaining depending on
mode setting.
12. SECONDS: Shows the seconds
elapsed or remaining depending on
mode setting.
13. FRAMES: The CD Player breaks
down a second into 75 frames for
accurate cueing. This shows the
frames elapsed or remaining
depending on mode setting.