2) specifi cations, Specifi cations – NEC NP40 User Manual
Page 63
55
7. Appendix
➋ Specifi cations
This section provides technical information about the NP60/NP50/NP40 projector's performance.
Model Number
NP60/NP50/NP40
Optical
DMD
Single Chip Digital Micromirror Device (DMD)
Resolution
1024 x 768 pixels* up to UXGA (1600 x 1200) with scaling technology
Lens
Manual zoom and auto focus (effective range: 57.1"/1.5 m - 216.5"/5.5 m)
/ manual focus
F2.2 - 2.34, f = 20.4 mm - 24.5 mm
Lamp
NP60: 220W AC (180W Eco mode)
NP50/NP40: 200W AC (180W Eco mode)
Light Output**
NP60: 3000 lumens (approx. 80% in Eco mode)
NP50: 2600 lumens (approx. 90% in Eco mode)
NP40: 2200 lumens (approx. 90% in Eco mode)
Contrast Ratio
(full white: full black)
NP60/NP50: 1600: 1
NP40:
1500:1
Image Size (Diagonal)
33" - 300" diagonal (4:3) (image sizes with less than 40" are available
only in tele mode)
Projection Distance
57" - 439" (wide) - 57" - 529" (tele)
1.5 - 11.1 m (wide) - 1.5- 13.4 m (tele)
Projection Angle
14.7° - 15.0° (wide) / 12.3° - 12.6° (tele)
Electrical
Inputs
1 VGA shared with component video (Mini D-Sub 15 Pin), 1 S-Video (Mini
DIN 4 Pin), 1 Video (RCA), 1 PC Control (Mini DIN 8 Pin)
Video Compatibility
NTSC, NTSC4.43, PAL, PAL-60, PAL-N, PAL-M, SECAM,
Component : 1080i, 720p, 576p, 480p, 576i, 480i
Scan Rate
Horizontal: 15 kHz to 100 kHz (RGB: 24 kHz or over)
Vertical: 50 Hz to 85 Hz
Color Reproduction
16.7 million colors simultaneously, Full color
Horizontal Resolution
NTSC / NTSC4.43/PAL / PAL-60/PAL-N/PAL-M/YCbCr: 540 TV lines
SECAM: 300 TV lines
RGB: 1024 dots (H) x 768 dots (V)
External Control
IR, RS232C
Sync Compatibility
Separate Sync / Composite Sync / Sync on Green / Sync on Video
Power Requirement/Input Current:
NP60 : 100-240 V AC, 3.2 - 1.3 A
NP50/NP40 : 100-240 V AC, 3.0 - 1.2 A
NP60G : 200-240 V AC, 50/60 Hz, 1.5 A
NP50G/40G : 200-240 V AC, 50/60 Hz, 1.4 A
* Effective pixels are more than 99.99%.
** This is the light output value (lumens) when the [Preset] mode is set to [High-Bright]. If any other mode is selected as the [Preset]
mode, the light output value may drop slightly.