Multiple frequency technology – NEC A700 JC-1736VMB User Manual
Page 9
Multiple Frequency Technology
Multiple Frequency Technology automatically adjusts the monitor to the
video card’s scanning frequency, displaying the resolution you desire.
The MultiSync A
500
/A
700
color monitor also supports multiple
operating platforms such as PC compatible, Macintosh family and
workstation systems.
Increased refresh rates at all resolutions provide a flicker-free image.
The clearer image is easier on your eyes and extends your viewing time.
A wide range of graphics standards of PC and Macintosh computers,
including VESA standards, is supported by the MultiSync A
500
/A
700
color monitor including:
–
640 x 480: 60 - 120 Hz
–
800 x 600: 55 - 100 Hz (A
500
) / 105 Hz (A
700
)
–
832 x 624: 55 - 90 Hz (A
500
) / 100 Hz (A
700
)
–
1024 x 768: 55 - 80 Hz (A
500
) / 85 Hz (A
700
)
(non-interlaced, 75 Hz (A
500
) / 85 Hz (A
700
) recommended)*
–
1152 x 870: 55 - 70 Hz (A
500
) / 75 Hz (A
700
)
–
1280 x 1024: 55 - 60 Hz (A
500
) / 65 Hz (A
700
)
(non-interlaced)**
* NEC cites recommended resolutions for optimal display performance.
** Maximum resolution based on horizontal and vertical frequencies only.
NOTE: Some system may not support all modes listed.
Horizontal and vertical FullScan capability can increase the display size
of a variety of video modes to the edges of the monitor bezel. The
FullScan capability allows you to use the entire screen area in most
resolutions, significantly expanding image size.
E - 4
Introduction