Navman ICN 550 - Manual (Page 12)

12
iCN 550 | User Manual
G
et
tin
g
st
ar
te
d
3. Starting your iCN
Before you begin, check if your vehicle is fi tted with a heat-refl ective or heated windscreen. If so, you will
need to purchase an external antenna for your iCN to receive GPS signals. See page 65.
Step One: Position the iCN in your Vehicle
Follow the safety notice on page 7 to ensure that the iCN does not obstruct the driver’s view, or
interfere with the operation of vehicle airbags and safety devices. Position the iCN in your vehicle
according to the instructions in your In-Car Installation Guide.
The Main Menu screen provides access to all of the iCN’s functions, including navigating to a
destination.
Step Two: Turn iCN On
1. If the Battery Switch is OFF, then remove and use the stylus to switch it ON.
2. Gently pull the bottom of the GPS receiver away from the iCN.
The receiver will lift out to a horizontal position, allowing it to obtain a GPS fi x.
3. Press .
The iCN will turn on.