Maintenance and troubleshooting – NordicTrack AudioRider NTEX4196.0 User Manual

Page 15

Advertising
background image

15

Inspect and tighten all parts of the exercise cycle reg-

ularly. Replace any worn parts immediately.

To clean the exercise cycle, use a damp cloth and a

small amount of mild soap. Important: To avoid

damage to the console, keep liquids away from

the console and keep the console out of direct

sunlight.

BATTERY REPLACEMENT

If the console display becomes dim, the batteries

should be replaced; most console problems are the

result of low batteries. See assembly step 5 on page

5 for replacement instructions.

HOW TO LEVEL THE EXERCISE CYCLE

After the exer-

cise cycle has

been moved to

the location

where it will be

used, make sure

that both ends of

the front stabiliz-

er are touching

the floor. If the

exercise cycle

rocks slightly during use, turn one or both of the level-

ing feet under the front stabilizers until the rocking

motion is eliminated.

HANDGRIP PULSE SENSOR TROUBLESHOOTING

If the handgrip pulse sensor does not function properly,

see step 5 on page 11.

HOW TO MOVE THE EXERCISE CYCLE

To move the exercise cycle, hold the handle on the

rear stabilizer and carefully lift it until the exercise

cycle can be moved on the front wheels. Carefully

move the exercise cycle to the desired location and

then lower it.

Handle

Wheel

Leveling Foot

MAINTENANCE AND TROUBLESHOOTING

Advertising