How to operate the exercise cycle – NordicTrack AudioRider NTEX4196.0 User Manual

Page 8

Advertising
background image

8

HOW TO ADJUST THE PEDAL STRAPS

To tighten a pedal

strap, simply pull

the end of the

pedal strap down-

wards. To loosen

the pedal strap,

press the tab on

the side of the

pedal and pull the

pedal strap

upwards.

HOW TO ADJUST THE SEAT

The seat can be

adjusted forward or

backward to the

position that is the

most comfortable

for you. To adjust

the seat, push

down on the seat

handle, slide the

seat to the desired

position, and then

pull up on the seat

handle to secure

the seat in place.

HOW TO ADJUST THE UPRIGHT

The upright can be

adjusted to the posi-

tion that is the most

comfortable for you.

To adjust the

upright, first raise

the upright so that it

is not resting on the

upright knob. Next,

turn the upright

knob clockwise or

counterclockwise to

raise or lower it.

Then, rest the

upright on the upright knob.

Pedal

Strap

Tab

Seat

Upright

Handle

HOW TO OPERATE THE EXERCISE CYCLE

Upright

Knob

12.Identify the Left Pedal (22), which is marked with an

“L.” Using an adjustable wrench, firmly tighten the

Left Pedal

counterclockwise into the Left Crank

Arm (24). Tighten the Right Pedal (not shown)

clock-

wise into the Right Crank Arm (not shown). Important:

Tighten both Pedals as firmly as possible. After

using the exercise cycle for one week, retighten

the Pedals.

Adjust the strap on the Left Pedal (22) to the desired

position, and insert the end of the strap into the latch

on the Left Pedal. Adjust the Right Pedal Strap (not

shown) in the same way.

12

13. Make sure that all parts are properly tightened before you use the exercise cycle. Note: After assembly is

completed, some extra parts may be left over. Place a mat beneath the exercise cycle to protect the floor.

22

Strap

24

Advertising