NAD 2100 - Manual (Page 2)

POWER AMP SECTION
Continuous output power into 8
Ω
* 60W (17dBW)
Rated distortion (THD 20Hz - 20kHz) 0.03%
Clipping power (maximum continuous power per channel) 70W
IHF Dynamic headroom at 8
Ω
+6dB
IHF dynamic power (maximum short term power per channel) 8
Ω
200W (23dBW)
4
Ω
250W (24dBW)
2
Ω
330W (25dBW)
Damping factor (ref. 8 Ω , 50Hz) >100
Input impedance 10k
Ω
/ 600pF
Input sensitivity (for rated power into 8 Ω ) 0.85V
Frequency response 3Hz - 100kHz / +0, -3dBdB
Signal/noise ratio ref. 1W 100dB
ref. rated power 117dB
THD (20Hz - 20kHz) <0.03%
Bridged Mode
Continuous output power into 8
Ω
* 100W (20dBW)
IHF Dynamic headroom at 8
Ω
+7dB
IHF dynamic power (maximum short term power per channel) 8
Ω
500W (27dBW)
4
Ω
660W (28dBW)
PHYSICAL SPECIFICATIONS
Dimensions
(W x H x D) 435 x 106 x 385mm
Net weight 9.5kg
Shipping weight 10.9kg
Power consumption (120 ~ 240V, 50/60Hz) 330VA
* Minimum power per chnnel, 20Hz - 20kHz, both channels driven with no more than rated distiortion.
Dimensions are of unit’s cabinet without attached feet; add up to 18mm for total height.
Dimension depth excludes terminals, sockets, controls and buttons.
© NAD Electronics. All rights reserved. E & OE