Netcomm liberty series - 3g travel router t1 – Nortel Networks T1 User Manual
Page 39
YMLT1WN
3G Travel Router t1 User Guide
www.netcomm.com.au
39
NetComm Liberty Series - 3G Travel Router t1
4. Can not remember your encryption key. What should you do?
If you forgot your encryption key, the Wireless card will not be able to establish a connection to your 3G Router.
To reset the encryption key(s), login to the 3G Router web configuration using an Ethernet connection.
5. How do you reset your 3G Router to its factory default settings?
To hard-reset the 3G Router to its factory default settings, follow the steps listed below:
•
Ensure that the router is powered on (for at least 1 minute).
•
Press the reset button for at least ten seconds and release. At this point, the reset is in progress. Do not power off the unit at this point.
•
After your 3G Router reboots, the default settings are now restored. This entire process takes several minutes to complete.
•
Once you have reset the router to its default settings you will be able to access the device’s web configuration using
http://192.168.20.1 with username/password of “admin”.
6. What you can do if the Ethernet cable does not work properly
•
The 3G Router’s Ethernet port is a WAN port by default, simply press the reset button down for one second for the WAN port to
switch to become a LAN port.
•
Ensure that there is a solid cable connection between the Ethernet port on the 3G Router, and your NIC (Network Interface Card).
•
Check that the settings on your network adapter are “Enabled,” and set to accept an IP address from the DHCP (Please refer to the
Computer Hardware Configuration section in this manual for additional information).
•
If all settings appear to be correct, ensure that you are not using a crossover Ethernet cable. Although the 3G Router is MDI/MDIX
compatible, not all NIC are. Therefore, it is recommended that you use a straight through Ethernet cable when possible.
7. What you can do when your 3G Router has no power
•
Plug in the power adapter provided to recharge your battery
Note: You can still use the 3G Router with no battery power, as long as the power adapter is plugged in.