NETGEAR HDX101 - Manual (Page 33)

HDX101 Powerline HD Ethernet Adapter User Guide
Installing the Powerline HD Ethernet Adapter 2-19
v1.1, November 2006
• In the “Item 1” column, type the SC101 UDP port number, 20001, in the UDP Port text
box.
• If necessary, change the priority. The highest priority you can assign is 6, and the lowest is
1.
5. Click the Set All Devices button to set the traffic prioritization rule into all Powerline HD
Ethernet adapter devices.
Other QoS Options
Besides UDP and TCP priority, the Powerline HD Ethernet adapter offers the following QoS rule
options:
• 802.1p prioritization
• TOS
• DSCP
These options only apply to QoS-configured business networks. IEEE 802.1p uses prioritization
bits in Layer-2 frames. TOS and DSCP use prioritization bits in Layer-3 IP packets. DSCP
(Differential Services Code Point) values range from 0 to 63; the deprecated TOS (Type Of
Service) values range from 0 to 7.
Figure 2-18