Nortel Networks i2002 - Manual (Page 6)

6 Getting started
P0995228 03
i2002 telephone display
There are three areas to the i2002 telephone display:
• Button label area
• Information area
• Feature options area
Figure 3 shows an example of the display and describes each area.
Figure 3 Display area
Button label area
The button label area shows the label and status of the four programmable memory buttons. For
more information about these buttons, refer to
“Program memory buttons” on page 12 .
Information area
The Information area shows:
• the date and time when the telephone is not in use, and changes to show features and call
information when the telephone is in use
Feature options area
When a feature is activated, or when you are on an active call, the display command line shows
you the action you must take to proceed.
For example:
Pswd. This means you must enter your mailbox password.
The Feature options area shows the label for the FEATURE button and for the three display buttons.
These button labels appear in capital letters directly above the Feature and display buttons, and to
the right of the
FEATURE label on the display. These button labels vary depending on the feature in
use.
About your programmable buttons
Your System Administrator assigns the four programmable buttons as line, intercom or memory
buttons. The label for each button appears on the display next to the button. For more information,
see your System Administrator.
Button label area
Information area
Feature options area
Call fwd
Conference
Page gen
Intercom
07/24 3:12 pm
Forward DND Timer More