Nvidia 680I LT SLI - Manual (Page 40)

Mainboard nForce 680i SLI/
Mainboard nForce 680i LT SLI
36
1. When the system boots up during the POST (Power-On Self Test), you will be given an
opportunity to enter the NVIDIA RAID Setup Utility when the screen prompts you with the
following message.
“Press ＜F10＞ to enter RAID setup utility…”
2. Press the <F10> key to enter the NVIDIA RAID Setup Utility (note that you will only have a
short window of time to press <F10> before the system continues the next step of the boot
process). The NVIDIA RAID Setup Utility main screen will display as shown below. In
addition, you will see all the SATA HDDs connected to your computer.