Network Technologies ETH-4X1 / 2X1 - Manual (Page 6)

5
Installation
1. Position the ETH-4X1 Manual Ethernet Switch such that the ethernet cable from the COMMON , the AC
adapter power cable, and the ethernet cables from the SELECTABLEs can reach the ETH-4X1 Manual
Ethernet Switch.
2. Connect one end of an ethernet cable to the COMMON (See Fig.1.) Connect the other end of that
cable to the "COMMON" port on the ETH-4X1 Manual Ethernet Switch.
3. Connect another ethernet cable between each SELECTABLE and the user selectable ports (1-4) on the
ETH-4X1 Manual Ethernet Switch. (See Figs.1 and 2.)