NEC N8406-022 - Manual (Page 55)

(English)
33
3
With the ejector being open, firmly hold the
Switch Module and slowly pull out from the
Blade Enclosure.
IMPORTANT:
・ Install the Switch Module in the Blade Enclosure after the period of 30
seconds or longer has passed from removing it from the powered
Blade Enclosure.
・ If the Blade Enclosure is used with the Switch Module being
removed, install the Slot Cover to the empty slot and secure it with a
screw.
NOTE: For the information how to install the Slot Cover, see the Blade
Enclosure User’s Guide.