Viewing device status, Power, Gps power – Navigon 8100T User Manual

Page 44

Advertising
background image

Basic Operations
Viewing device status

26

NAVIGON 8100T User’s Guide

December 2008

NAVIGON, INC.

Version 1.1

Viewing device status

Symbols located at the top right of the screen are used to display information.

GPS

The GPS symbol can show the following GPS reception status:

No Symbol

The built-in GPS receiver is not operational. Contact customer
service if the problem persists.

No Signal

Data is being received from fewer than three satellites. Position
cannot be calculated.

GPS Ready

Data is being received from at least three satellites. Position can
be calculated.

Power

The Power symbol can display the following conditions of the built-in battery:

The device is powered by an external power source. The battery is charging.

The device is powered by its internal battery. Battery is fully charged.

The device is powered by its internal battery. Battery charge is sufficient.

The device is powered by its internal battery. Battery charge is low.

For more information, see “About GPS navigation” on page 7.

For more information on recharging your device, see “Charging the battery” on
page 12.

Caution!

When the No Battery (

) icon displays, the battery has no power

remaining. The device will soon turn off. S

ee “Charging the battery” on page 12.

Caution! Do not attempt to replace the battery. For problems related to the battery, con-
tact NAVIGON Customer Support.

Advertising