Eizo FlexScan L665 - Manual (Page 13)

English
2. CABLE CONNECTION
13
2-2. Connecting the signal cable
NOTE
• Be sure that the power switches of both the PC and the monitor are OFF.
1.
Plug the signal cable into the connector at the rear of the monitor
and the other end of the cable into the video connector on the PC.
After connecting, secure the connection with the screw-in fasteners.
Analog Input
Signal Cable Connector PC
Signal Cable (enclosed) Video Output
Connector D-Sub
mini 15 pin •
Standard graphics card
•
Macintosh G3 (Blue & White) /
G4
Signal Cable (enclosed) +
Macintosh Adapter
(Optional) Video Output
Connector D-Sub
15 pin •
Macintosh
Digital Input
Signal Cable Connector PC
FD-C04 (Optional) Video Output
Connector DVI Digital Graphics card
NOTE
• The L665 is not compatible with a Power Macintosh G4/G4 Cube ADC (Apple
Display Connector).
Power Cord
Power Cord