Setting up the interrupt feature – Nortel Networks Enterprise Edge Voice Messaging User Manual

Page 4

Advertising
background image

4

Enterprise Edge 2.0 Voice Messaging Quick Reference Guide

Enterprise Edge 2.0 Voice Messaging Quick Reference Guide

P0911949 Issue 02

Setting up the Interrupt feature
Before you can use the Interrupt feature you must program a memory button with an
indicator for the feature. While a caller is listening to your mailbox greeting or leaving
a message, the Interrupt memory button indicator blinks quickly. Press the Interrupt
memory button to retrieve the call.

To program a memory button for the Interrupt feature:

1. Do not lift your handset. Press ƒ•‹.

2. The display shows Program Features.

3. Press a memory button with an LCD indicator.

4. Press ƒ·°‡.

The display shows that the button is programmed.

Forwarding your calls to Enterprise Edge Voice Messaging

To forward your calls to Enterprise Edge Voice Messaging, press ƒ·°›.

Setting up Call Forward Remotely

1. Call the Automated Attendant or your telephone from any tone dial telephone.

2. While the greeting plays press ••, or in the UK press °°.

3. Enter your Mailbox number and password and press £.

4. Press °, press ¤ and then press ‹.

5. Press ⁄ to enable or disable Call Forward.

6. Press ⁄

to enable or disable Call Display.

7. Replace the handset to end the session.

Advertising