Nikon S610 - S610c - Manual (Page 133)

121
T
e
chni
cal N
o
te
s
Error Messages
The following table lists the error messages and other warnings displayed in the
monitor, as well as the solutions for dealing with them.
For Users of the COOLPIX S610c
See the Wireless LAN Connection Guide for error messages that may be displayed
with use of the wireless LAN feature.
Display Problem Solution A
O (blinks) Clock not set. Set clock. 104
B Battery running low. Prepare to charge or
change battery. 12, 16
N
Battery
exhausted.
Battery exhausted. Charge or change battery. 12, 16
P
Battery temperature
high
Battery temperature is
high. Turn off camera, and allow
battery to cool down
before resuming use. After
five seconds, this message
will disappear, the monitor
will turn off, and the
power-on lamp will blink
rapidly. After the lamp
blinks for three minutes,
the camera will turn off
automatically, but you can
also press the power
switch to turn it off
manually. 15
Q ( ● blinks red)
Camera cannot focus. Refocus. 26, 27
u
Please wait for the
camera to finish
recording.
Camera cannot perform
other operations until
recording is complete. Wait until message clears
from display automatically
when recording is
complete. 27
N
Memory card is write
protected.
Write-protect switch is in
“lock” position. Slide write-protect to
“write” position. 21