First steps – Nikon S610 - S610c User Manual

Page 24

Advertising
background image

12

First Ste

p

s

First Steps

Charging the Battery Using the Battery Charger (COOLPIX S610)

If you are using the COOLPIX S610, charge the Rechargeable Li-ion Battery EN-EL12
(supplied) using the Battery Charger MH-65 (supplied).
If you are using the COOLPIX S610c, the Battery Charger MH-65 is not supplied

with the camera. Insert the battery into the camera and charge it by connecting
the AC adapter. Proceed to “Inserting the Battery into the Camera” (

A 14) and

“Charging the Battery Using the AC Adapter (COOLPIX S610c)” (

A 16).

1

Connect the power cable.

Connect the power cable to the battery charger 1 and insert the wall plug into a power
outlet 2. The CHARGE lamp will light to show that the charger is on 3.

2

Charge the battery.

Insert the battery into the battery charger. Slide the
battery forward 1 and then press down until it locks
into place 2.

CHARGE lamp starts blinking 3 when battery is
inserted. Charging is complete when lamp stops
blinking 4.

About 150 minutes are required to charge a fully
exhausted battery.

3

1

2

Advertising