Nikon S610 - S610c - Manual (Page 26)

14
First Ste
p
s
Inserting the Battery into the Camera
Insert a Rechargeable Li-ion Battery EN-EL12 (supplied) into the camera.
• Charge the battery before the first use or when the battery is running low. For
more information about charging the battery, see “Charging the Battery Using
the Battery Charger (COOLPIX S610)” (
A 12) if you are using the COOLPIX S610,
or “Charging the Battery Using the AC Adapter (COOLPIX S610c)” ( A 16) if you
are using the COOLPIX S610c.
1
Open the battery-chamber/memory card slot
cover.
Slide the cover latch to the Y position 1.
2
Insert the battery.
Confirm that the positive (+) and negative (–) terminals
are oriented correctly as described on the label at the
entrance of the battery chamber, and insert the battery.
Use the battery to push the orange battery latch in the
direction indicated by the arrow 1 and fully insert the
battery 2. When the battery is fully inserted, the battery
latch will lock it in place.
B
Inserting the Battery
Inserting the battery upside down or backwards
could damage the camera. Be sure to check the
battery is in the correct orientation.
3
Close the battery-chamber/memory card slot
cover.
Slide the cover latch to the Z position 2.