NAD Masters Series M3 - Manual (Page 3)

Pre-Amp Section
Line level inputs
Input impedance (R+C)
Balanced Input impedance (R+C)
Input sensitivity, rated power
Frequency response (-3dB - 70kHz)*
Line level outputs
Output impedance
Tape
Signal/noise ratio
Tone Controls
Bass
Treble
Spectral Tilt
Power Amp Section
Continuous output power into 4/8 ohms †
Rated Distortion (THD 20Hz - 20kHz)
Clipping power ‡
IHF dynamic headroom at 8 ohms
IHF dynamic power at 8 ohms
IHF dynamic power at 4 ohms
IHF dynamic power at 2 ohms
Damping factor (ref. 8 ohms, 50Hz)
Input impedance
Input Sensitivity (for rated power into 8 ohms)
Voltage gain
Frequency response; 20Hz-20kHz
-3dB at:
Signal/noise ratio; ref 1W
Signal/noise ratio; ref rated power
Physical Specifications
Dimensions (W x H x D)
Net Weight
Shipping Weight
150k//500p
120k//100p
446mV
<+/-0.3dB
10
Source Z + 1k ohm
>110dB (AWTD)
±5dB
±5dB
±3dB
2 x 180W (22.5dBW)
0.004%
220W (23.4dbW)
4.2dB
280W (24.5dBW)
480W (27.2dBW)
785W (28.4dBW)
>150
20k ohm/ 680pF
1.38V
29dB
+/-0.03dB
>80kHz
>107dB (AWTD)
>130dB
17 1/8 x 5 1/4 x 15 3/16”
(435 x 135 x 386mm)
51.8 lbs (23.5 kg)
67.0 lbs (30.5kg)
Preliminary Specifications