Network Computing Devices USB-Host to Ethernet Adapter PS6U1UHE - Manual (Page 4)

CradlePoint USB-Host to Ethernet Adapter User Guide
Introduction
The CradlePoint PS6U1UHE serves as an essential data communications device, enabling
you to synchronize the information on your Symbol® MC1000 and a host computer across
a standard Ethernet network.
There are 3 connection ports on the PS6U1UHE. These are described below:
Ports Function
5VDC 1A
(Power)
A standard barrel port used for connecting the included Power Adapter.
USB Mini-A
Used to connect to the M1000 USB port for ActiveSync, or other communications,
to other computers on the Ethernet networks. The special USB Mini-A to Mini-B
adapter cable is included.
Ethernet
(RJ45 Ethernet
Port) Used to connect to your Ethernet network for ActiveSync, or other communications,
to other computers on the networks, using a standard RJ45 Ethernet cable
(The standard Ethernet cable is not provided).
Lights Function
Flashing yellow
(slow)
Start up, acquiring IP address
LED off
IP address acquired, no terminal connected (no PPP
connection), no other problems
Solid Red
IP address acquired, terminal connected but no PPP
connection established
Solid Green
IP address acquired, terminal connected (PPP connection
established)
Flashing Green
(slow)
PPP traffic, active communication
USB LED
Flashing Red
(rapid)
Unable to acquire IP address, Timeout, general error
Solid Green Link established
Flashing Green Link activity
Ethernet
Green LED
(left)
Off No link established
Off 10 Mb connection Ethernet
Yellow LED
(right)
Solid Yellow 100 Mb connection (not available this model)
1 CradlePoint, Inc