NAD T775 - Manual (Page 34)

ABOUT iPod INPUT FEATURE
The T 775 is equipped with a data port in the rear panel where an optional NAD iPod dock station can
be plugged in. With the NAD iPod dock linking the T 775 with your own iPod player, you can enjoy
listening to your favorite tracks and playlists as well as view applicable still image and video playback.
You can control your iPod player using the assigned buttons in the T 775 front panel. And with the
corresponding HTR 3 remote control function keys, you can select the materials stored in your iPod
for playback as well as access many of its functions even from across the room. The optional NAD iPod
docking station also charges your iPod player while it is connected to the T 775.
NOTES
• NAD iPod docking station and iPod player are optional and not supplied with your T 775.
• iPod player functions, features and playback capabilities accessible through T 775 may vary
depending on your iPod player model.
• When using the HTR 3 to control the iPod functions, make sure that the Device Selector is set to
“AMP.”
CONNECTING THE OPTIONAL NAD iPod DOCKING STATION AND iPod PLAYER TO THE T 775
Make sure that all the devices are unplugged before making the connections.
1. Connect the NAD iPod docking station’s plug into the T 775’s ‘MP DOCK’ data port.
2. Connect also the iPod docking station’s S-video out and audio out to the T 775 Audio 5/Video 5
input (the default iPod source allocation in the T 775). You can also connect both audio and video
out connectors to any available assignable input of the T 775.
3. Dock your iPod player into the NAD iPod docking station.
NAVIGATING THE iPod PLAYER’S FUNCTIONS AND FEATURES
After linking together your iPod player, NAD iPod docking station and the T 775, you can now plug
them IN to their applicable power sources.
1. With your T 775, iPod player and NAD iPod docking station all at power ON state, select SOURCE 5
of your T 775. Your iPod player will show in its display the NAD logo and below it “OK to
disconnect.” On the other hand, the T 775 VFD will show in the upper line “iPod Menu” and the
lower line “Playlists”. The lower line will vary depending on the current menu selected.
At the same time, the T 775 OSD will display the whole iPod Menu selections like Playlists, Artists,
Albums, Songs, Podcasts, Genres, Composers and Audiobooks.
2. Navigate through the iPod menu selections using a combination of the [ ] buttons.
NOTES
• The iPod player’s click wheel and controls will not operate when it is properly connected to the T 775
via the NAD docking station.
• To exit from the iPod Menu at Source 5, press [ ] bringing you to ‘Menu Select’ OSD. Follow the
instructions as shown.
CONTROL FEATURES AND SETTINGS
The following control functions and settings are selectable or enabled using the front panel and HTR 3
remote control buttons. Since the HTR 3 will be the primary controller in most cases, we will focus on
remote-controlled operations.
ENTER
Press [ENTER] to go “iPod Settings’ menu where you can setup the following options:
Shuffle : Select [Shuffle] to enable random playback of either [Songs] or [Albums] lists. To turn off
shuffle mode, select [Off].
Repeat : Select [One] for repeated playback of the current song. Select [All] for repeated playback
of your entire list under [Songs] selection.
Audiobook Speed : The playback speed of your audiobook can be varied according to your
preference. During audiobook playback, adjust the reading speed to [Normal], [Fast] or [Slow].
DISP
During playback, toggle [DISP] key of HTR 3 to show in the T 775 VFD upper line the Song title, Artist
Name and Album title. If there are no information available, the display will show “No Song,” “No Artist”
or “No Album” as applicable. Aside from these information, the lower line will display the current title’s
track number allocation and time elapsed.
The equivalent front panel key for [DISP] is [INFO].
OPERATION
USING THE T 775 – AM/FM/DB/iPod
4
EN
G
LIS
H
FR
A
N
Ç
A
IS
ES
PA
Ñ
O
L
IT
A
LIA
N
O
D
EU
TS
CH
N
ED
ER
LA
N
D
S
SV
EN
SK
A
РУ
СС
К
И
Й