Nikon Coolpix 100 User Manual
Page 44
32
Indication: Exposure count shows zero
•
Memory is full. Delete one or more photographs as described in “Deleting
Pictures from Memory”.
The flash doesn't work or takes more than thirty seconds to
charge
Indication: The flash indicator in the control panel display is set to
“Off” (
)
•
Set the flash to “Auto” or “On” before use. See “Using the Flash”.
Indication: Battery level indicator shows low or critical battery level
•
Battery level is low. Replace the batteries as described in “Putting
Batteries in Your Camera” before using the flash.
Indication: The camera is set to “Macro close-up”
•
The flash will not charge when the camera is in macro close-up mode.
Change the setting to “Normal” before using the flash (see “Macro Close-
Up”).
Images are over- or under-exposed
•
When using the flash, be sure that your subject is within a range of 1.2 –
2.25 meters (3´11˝ – 7´5˝).
Your computer can't read the camera's image data files
Checklist:
•
Is the camera correctly inserted in the computer's card slot?
Insert the camera as shown in “Connecting Your Camera to a Computer” .
•
Is your browser software properly installed on your computer?
Consult the documentation for your browser.
•
Is your computer properly configured for an ATA RAM card?
Consult the manual for your computer's card drive.
Troubleshooting