Eizo FlexScan L461 - Manual (Page 13)

2. CABLE CONNECTION
13
ENGLISH
2.
Plug the power cord into the power connector on the rear of the
monitor and plug the other end of the power cord into a power outlet.
• Use the enclosed power cord and connect to the standard
power outlet of your country. Be sure to remain within the
rated voltage of the power cord.
Not doing so may cause in fire or electric shock.
• The equipment must be connected to a grounded main
outlet.
Not doing so may cause in fire or electric shock.
WARNING
WARNING
3.
Turn on the monitor’s power and then switch on the PC’s power.
Whenever finished, turn off the PC and the monitor.