Eizo FlexScan L461 - Manual (Page 25)

4. ADJUSTMENT
25
ENGLISH
2.
To change the saturation.
Ж Ж Ж Ж Ж Use the “Saturation” adjustment.
The “Saturation” can be selected from -64 to 64. Setting the minimum level (-64)
turns the image to the monochrome.
To register the adjustment, select the “Save” icon and then push the enter button.
• The “Saturation” adjustment may cause undisplayable color tone.
3.
To change the flesh color, etc.
Ж Ж Ж Ж Ж Use the “Hue” adjustment.
The “Hue” can be selected from -16 to 16.
To register the adjustment, select the “Save” icon and then push the enter button.
• The “Hue” adjustment may cause undisplayable color tone.
4.
To adjust each color (red, green and blue).
Ж Ж Ж Ж Ж Use the “Gain” p.35) adjustment.
By adjusting the red, green and blue color tones for each mode, custom colors can
be defined.
The 100 % indicates unadjusted condition.
Display a white or gray background image and adjust the “Gain”.
To register the adjustment, select the “Save” icon and then push the Enter button.
• The “Gain” adjustment may cause undisplayable color tone.
• Adjusting the “Gain” invalidates the color temperature setting. (The color
temperature’s setting turns “OFF”. )