Network Computing Devices Wireless Ethernet Adapter GW-EN11H User Manual
Page 16
GeoWave GW-EN11H Wireless Ethernet Adapter User's Manual
16
4.
The utility will show the adapter found and other wireless devices found in the same
network, where your PC is located.
Note!
If the adapter is not shown in the list, please make sure all the cables are well
connected.
5.
Double-click on the adapter, then you will access into its built-in web server, and it will
show as below. Then directly click OK button. (
).
Note!
If you cannot access into adapter’s built-in web server, please make sure if
your PC now is in the same subnet with adapter. Please use right-click of
mouse to click on the adapter listed in Wireless Navigator. “Set IP address”
option will pop out, and then change IP address of AP to the same subnet as
your PC.