Hardware installation, Physical details, Rear panel – Network Computing Devices Wireless Ethernet Adapter GW-EN11H User Manual

Page 7

Advertising
background image

GeoWave GW-EN11H Wireless Ethernet Adapter User's Manual

7

2.Hardware Installation

Physical Details

Rear Panel

INIT Button

“INIT” mean “Initiation”. While pressing the button, the adapter will

reboot and ERASE current settings, and restore to factory default

settings. The left indicator “DIAG” will be off and then begin

blinking. Then this initiation action will be completed when the

indicator “ DIAG” is always green instead of blinking.

LAN Cable

Selection Switch

X

Crossover: the RJ-45 port Tx and Rx lines are
reversed. Use this setting when you have a straight
cable connected to PC. It is also the factory default
setting.

II

Straight: the RJ-45 port Tx and Rx lines are normal.
Use this setting when you have a crossover cable
connected.

Power Input

Please only use the power adapter supplied

LAN Connection

Use standard RJ-45 Ethernet cable to connect your PC, or any

Ethernet-ready device, such as printer server.

LAN Connection

Power Input

LAN Cable

Selection Switch

INIT Button

Advertising