Т³гж 2, Description & intended use, Technical specifications general safety rules – Northern Industrial Tools 112020 User Manual
Page 2: Save these instructions
1 of 4
For technical questions and replacement parts, please call 1-800-222-5381.
Thank you very much for choosing a NORTHERN TOOL + EQUIPMENT CO., INC. Product!
For future reference, please complete the owner's record below:
Model: _______________ Purchase Date: _______________
Save the receipt, warranty and these instructions. It is important that you read the entire
manual to become familiar with this product before you begin using it.
This machine is designed for certain applications only. Northern Tool + Equipment strongly
recommends that this machine is not modified and/or used for any application other than
that for which it was designed. If you have any questions relative to a particular application,
DO NOT use the machine until you have first contacted Northern Tool + Equipment to
determine if it can or should be performed on the product.
Before using this product, please read the following instructions carefully.
DESCRIPTION & INTENDED USE
The Northern Industrial Air Palm Sander features an advanced design with a compact
structure, superior technology and substantial attack strength. This model is safe and
reliable to operate while driving nails into the workpieces without a trigger. Ideal for nailing
in tight corners, toe-nailing, joist hanger installations and more.
GENERAL SAFETY RULES
WARNING: Read and understand all instructions. Failure to follow all instructions
listed below may result in electric shock, fire and/or serious injury.
WARNING: The warnings, cautions, and instructions discussed in this instruction
manual cannot cover all possible conditions or situations that could occur. It must be
understood by the operator that common sense and caution are factors which cannot be
built into this product, but must be supplied by the operator.
SAVE THESE INSTRUCTIONS
Keep work area clean and well lit. Cluttered and dark work areas can cause accidents.
Do not use your pneumatic tool where there is a risk of causing a fire or an explosion;
e.g., in the presence of flammable liquids, gasses, or dust. Pneumatic tools can create
sparks, which may ignite the dust or fumes.
Keep children and bystanders away while operating a pneumatic tool. Distractions
can cause you to lose control, so visitors should remain at a safe distance from the work
Up to 4-3/4 Inches
5d to 70d
4" x 3" x 5 "