Northern Industrial Tools 143379 - Manual (Page 2)

READ ALL INSTRUCTIONS BEFORE OPERATING
SAVE THESE INSTRUCTIONS
Before attempting to operate your new Angle Grinder please read these instructions
thoroughly. You will need these instructions for the safety warnings, precautions, assembly,
operation, maintenance procedures, parts list and diagrams.
WARNING: The warnings, cautions and instructions discussed in this instruction manual
cannot cover all possible conditions or situations that could occur. It must be understood by
the operator that common sense and caution are factors which cannot be built into this
product, but must be supplied by the operator.
TABLE OF CONTENTS
Description Page #
Warranty..............................................................1
Specifications......................................................1
Safety rules .......................................................1-2
Getting Started....................................................3
Assembly ............................................................3
Operating Your Grinder.......................................4
Tech Tips.............................................................4
Maintenance .......................................................5
Parts List and Diagram .......................................6
SPECIFICATIONS
Motor ......................................120V~ 60Hz – 8amp
No Load Speed....................................11,000 RPM
Weight..............................................................7 lbs
Overall Length.................................................16.5"
Spindle Thread..................................5/8" - 11 UNC
SAFETY RULES
WARNING: The double-insulated system is intended to protect the user from shock
resulting from a break in the tool's internal wiring. Observe all normal safety precautions relat-
ed to avoiding electric shock.
1. Know your machine. Read this manual carefully. Learn the machine’s applications and
limitations, as well as specific potential hazards peculiar to it.
2. Ground all machines. This machine is “Double Insulated,” meaning that all outside metal
parts are insulated from electrical power. Double Insulated tools are equipped with a
polarized plug. This plug will fit in a polarized outlet only one way. If the plug does not fit
fully in the outlet, reverse the plug. If it still does not fit, contact a qualified electrician to
install a polarized outlet. Do not attempt to circumvent this safety feature.
1