Niles Audio MSU140 - Manual (Page 9)

1 2 3 4 POWER
+12V DC
3-30V
AC/DC
STATUS
IN FLASHER OUTPUTS
MSU140
IR MAIN SYSTEM UNIT
INPUT 1
Sensor/Keypad Cable
The MSU140 connects to IR sensors and the Intellipad with
category 5 cable, with a maximum cable run of 500'.
Flasher Cable
Niles infrared flashers come supplied with a 10 foot 2-con-
ductor 22 gauge cable. Should you need to extend it, use a
16 gauge 2-conductor cable (“zip-cord”). Shielding is not
necessary for a flasher. Flasher wires can be extended up to
200 feet.
8
I N F R A R E D M A I N S Y S T E M U N I T
TOOLS
REQUIRED
• 1/8" Standard
Slotted
Screwdriver
• Wire Stripper
WS100 Sensor
To unswitched
AC Outlet
Figure 6:
MSU140
Installation
MSU140 Sensor
Connection
MSU140
To Niles
IR Flasher
To 3-30V AC/ DC power supply
plugged into a switched
AC outlet.Typically found
on back of a receiver.
DS00329BCN-MSU140-1.qxp 8/17/05 11:26 AM Page 8