NetComm IG1000 - Manual

THE SIMPLEST, MOST COST-EFFECTIVE EMBEDDED MODEM – WITH SEPARATE DEVELOPER’S KIT
EMBEDDED V.92 MODEM TECHNOLOGY
INDUSTRIAL MODEM & DEVELOPERS KIT
NetComm Limited ABN 85 002 490 486
PO Box 1200, Lane Cove NSW 2066 Australia. PHONE (02) 9424 2070 • FAX (02) 9424 2010 • EMAIL [email protected] • www.netcomm.com.au
Trademarks and registered trademarks are the property of NetComm Limited or their respective owners. Specifications are subject to change without notice. Images shown may vary slightly from the product.
BENEFITS
• Greatly reduced approval time and costs
• Simply provide for the pinouts in your design
• Logging Data real time vs onsite time
• Low cost management and support
• Low cost networking
• End user accessibility and add-on service possibilities
Key Specifications
• V.92 – upstream rates up to 48Kbps, QuickConnect, and Modem-
on-Hold functions
• V.92, V.90, V.34, V.32bis, V.32, V.22 bis, V.22, V.23, and V.21;
• V.22 bis Fast Connect
• Bell 212A and Bell 103
• 2-wire Leased Line
• TAM support
• Fax Class 1 & 2
• External flash ROM includes default values for 29 countries
• Flash upgradable
• Caller ID
• Small design (25mm x 65mm)
• Extensive AT command set
• Designed in Australia
• Local Support
• Local and International Approvals: A-Tick, CB Certified,
EN55022 Class B, FCC Part 15 Class B
The IG1000 is the first uniquely Australian developed modem
that offers designers a space efficient communications module
suitable for any data transfer application.
NetComm’s IG1000 enables OEM’s to integrate a variety of modem
functions with the benefit of accessing real time data, low cost
management/support, plus add-on service possibilities.
International EMC and safety standards have been tested and
certified, bringing the integration cost down for approval ratings
on the finished product. Structured to fit into a generic industry
footprint, this Conexant chipset product brings with it all the
capabilities of a full hardware modem.
This product can be integrated into any device that requires data
transfer via a PSTN connection, incorporating the latest V.92
technology to give your product the benefit of high upstream
speeds (up to 48Kbps).
The separate IG1000 TEST 5V Developer’s Kit includes:
• Board with footprint socket
• 9-pin serial interface connector
• Power input socket
• PSTN (telephone) socket