Navman F20 - Manual (Page 4)

| F-Series Desktop
4
What is F-Series Desktop?
F-Series Desktop is software for your computer and is used to:
ƒ
purchase and download subscriptions (including safety camera updates)
ƒ install and manage custom Places of Interest (POI)
ƒ backup your settings and Favorites
System requirements: IBM compatible PC running Microsoft Windows 2000 SP3 or XP SP2, Internet Explorer 6 or higher, CD drive, USB port and
Internet connection.
The use of information regarding safety camera locations may be subject to local laws in the country of use. You are
responsible for checking that you can use the information in your country or in the country where the information will be used.
How do I install F-Series Desktop onto my computer?
Do NOT connect your Navman to your computer until you have competed steps 1 to 5 below.
While installing F-Series Desktop, you might be asked to install a service pack if an update is available. If so, please follow the
prompts to complete the update process.
1. Close all open programs on your computer.
2. Insert the F-Series Desktop Application Installer CD into your computer CD drive.
The F-Series Desktop installer will start.
If your computer does not automatically launch the CD, start the installation manually:
Start > Run. Type D:\Install.exe where “D” is the letter assigned to your CD drive, then click OK.
3. Select your preferred language for F-Series Desktop.
4. Click
Install F-Series Desktop.
5. Follow the screen prompts to install F-Series Desktop:
ƒ Review and accept the Licence Agreement for F-Series Desktop when prompted.
ƒ Select a destination folder for F-Series Desktop when prompted.
6. Connect your Navman to your computer:
a) Plug the large end of the USB cable directly into a USB port on your computer (not a USB hub). Plug the small end into the USB Socket (

)
on the side of your Navman.
Where possible, plug the USB cable into a USB port at the back of your computer.
7. Press and hold the Power Button (O) for at least 3 seconds.
Your Navman will turn on.
a) When the following screen displays on your Navman, click Install in the F-Series Desktop installation window:
If this screen does not display, press and hold O a little longer.
8. When the installation has finished, click Finish.
F-Series Desktop will open.