NEC PD75P308 - Manual (Page 15)

µ
PD75P308
15
4. ELECTRICAL SPECIFICATIONS
ABSOLUTE MAXIMUM RATINGS (T
a
= 25
°
C)
Parameter Symbol Conditions Rating Unit
Supply Voltage V DD -0.3 to +7.0 V
Supply Voltage V
PP
-0.3 to +13.5 V
V I1 Other than ports 4 or 5 -0.3 to V DD +0.3 V
V I2
*1 Ports 4 and 5 Open-drain -0.3 to +11 V
Output Voltage V
O
-0.3 to V
DD
+0.3 V
1 Pin -15 mA
I OH
All pins -30 mA
Peak value 30 mA
Effective value 15 mA
Peak value 100 mA
Effective value 60 mA
Peak value 100 mA
Effective value 60 mA
Operating Temperature T
opt
-10 to +70 ° C
Storage Temperature T stg -65 to +150
°
C
*1: The impedance of the power source (pull-up resistor) must be 50 K
Ω
minimum when a voltage higher
than 10V is applied to ports 4 and 5.
2: Effective value = Peak value x
√
Duty
One pin
Total of ports 0, 2, 3, 5
Total of ports 4, 6, 7
I OH
*2
High-Level Output Current
Low-Level Output Current
Input Voltage