Nikon LS-30 - Manual (Page 31)

- 31 - Using the Scanner: Using the MA-20 S
LIDE
M
OUNT
A
DAPTER
Slides can be removed from the scanner by pressing the eject
button to eject the slide from the adapter and then pulling the
slide the rest of the way out with your fingers.
✔
Cautions
• Do not attempt to insert or eject slides while scanning is in
progress.
• Do not move the scanner or subject it to shock or vibration
while scanning is in progress.
• Slides must be between 1.0 mm and 3.2 mm in thickness.
• If the surface of the mount is rough, you may experience
some resistance when inserting or removing the slide.
• Do not leave slides in the adapter for extended periods.