Hyundai H-TV1403 - Manual (Page 12)

12
Basic Operation
Power ON/ OFF
Connect to the mains
Insert the mains plug of the unit into 110~240V AC mains outlet, unplug it when the unit will not be used for a long period of time.
How to power on/off
1. Press the main power switch, the image or snowy picture will display.
2. In case of the screen no snowy or picture, press POWER button on the remote control to exit Standby status.
3. If you want to turn off the unit temporarily during watching, press down POWER button on the remote control.
4. Press down the POWER switch on the unit to power off completely.
Non-signal automatic power-off in 10 minutes
In case the unit under non-signal screen saver state, TV will enter standby status automatically 10 minutes later, to turn it on again, please press down
POWER button on the remote control or PROG. button on the unit.
Memory Function Before Power off
The setting of picture, sound and the preset channels will be memorized before turning off the unit. When being started up again, the unit will work
according to your preset settings before being turned off. But please note that if the mode is AV before being turned off, it will work under AV mode
when being started again.
Preset menu
Presetting the channels
This unit being offered automatic and semi-automatic preset way to preset channel, select one to set channels.
Auto Search preset
1. Press MENU button six times to enter PRESET menu as the figure shown:
2. Press PROG. button to select AUTO-SEARCH.
3. Press VOL button to start AUTO-SEARCH, and the program will return to program 0 at the end of searching.
4. Press MENU button again to stop searching at any time.