Hyundai H-TV1403 - Manual (Page 13)

13
After presetting:
Press PROG. button to check every channel, if the image or sound of one channel is abnormal, please press SYSTEM button to enter SYSTEM
menu and adjust colour or sound .
Search preset
1. Use PROG. button or number buttons to select one channel you desired.
2. Press MENU button six times to enter PRESET menu as the figure shown.
3. Use PROG. button to select SEARCH as the figure shown.
4. Press VOL button to search higher position channel or VOL button to search lower position channel, when one program being selected, the
searching will stop and store this program.
5. Press MENU button again to stop searching during SEARCH operation.
6. Press MENU button to return to normal picture. If you need to preset other channels, just repeat step1 to step 6.
7. You can adjust all your desired channels to your desired program with this function.
Fine tune preset (FINE)
1. Press PROG. button or number buttons to select one channel.
2. Press MENU button six times to enter PRESET menu as figure shown.
3. Press to select FINE.
4. Press VOL button to search higher position channel or press VOL button to search lower position channel, loose VOL or VOL
button when reaching one program.
5. Press MENU button to return to normal picture, to set other channels, please repeat step 1 to step 4.
6. If one program has been preset with fine tune, AFT function will be off automatically and this program number will display in yellow while
you select this program to watch.
Skip unnecessary program number
1. Use PROG. or number buttons to select one channel.
2. Press MENU button six times to enter PRESET menu as figure shown.