Native Instruments B4 II - Manual (Page 33)

B4 II – 33
Use in Digital Performer 4.6
• Launch Digital Performer and create an instrument track by selecting
Project  Add Track  Instrument Track  B4 II.
• Create a MIDI track by selecting Project  Add Track  MIDI Track.
In Digital Performer’s track overview window (or in the sequence editor
window) assign the ouput of this MIDI track to “B4 II-1” and a MIDI
channel.
• The plug-in is now ready to use. The mixer of Digital Performer will
allow you to mix, pan, and process B4 II's output just like any other
existing audio track.
• To play B4 II with your keyboard, record enable the MIDI track which
you have routed to B4 II and make sure MIDI Patch Through is enabled
in the Studio menu of Digital Performer.
• Double click on the B4 II slot in Digital Performers mixing board
to call up the B4 II interface. Here you can control and edit all the
features and functions that B4 II has to offer.
Note: If the product does not appear in the list of available Audio Unit
plug-ins inside your Audio Units host application, then it is not installed
correctly. Please refer to the previous section on installing the plug-in
for Mac platforms for more assistance on setting this up.
After having loaded an Instrument from the library you should be able to trig-
ger it via MIDI using a keyboard controller. B4 II’s sound will generate through