Nokia 5700 - Manual (Page 45)

44
View visual content
To check availability and costs, and to subscribe to the service, contact your service provider.
To view visual content of the current station, select .
If the visual service ID was not saved in the station list, you are asked for the visual service
ID. Enter the visual service ID, and select OK. If you do not have the visual service ID, select
Retrieve to access the station directory (network service).
To end the visual content feed but not the FM radio, select Close.
To set light settings and the power saver time-out, select Options > Display settings.
Visual Radio settings
When the radio is on, select Options > Settings and the following:
Start-up tone—to enable or disable the start-up tone
Auto-start service—to enable or disable the automatic display of visual content
Access point—to select the access point
Station directory
With the station directory (network service) you can select Visual Radio enabled or
traditional radio stations from a list, grouped in folders.
To check availability and costs, and to subscribe to the service, contact your service provider.
Access from the visual content view
To retrieve the visual service ID and to start visual content for the currently tuned radio
station, select
and Retrieve. After the connection to the station directory is established,
select the nearest location to your current position from a list of folders, and press the
scroll key.
The device compares the frequencies of the listed radio stations with the currently tuned in
frequency. If a matching frequency is found, the visual service ID of the tuned radio station
is displayed. Select OK to start viewing the visual content.
If there is more than one radio station with matching frequencies, the radio stations and
their visual service ID are displayed in a list.
Select the desired radio station. The tuned radio station and the visual service ID are displayed.
Select OK to start viewing the visual content.
Access from options
To access the station directory (network service) from the station list, select Options >
Station directory.