Nexus 21 NX2 - Manual (Page 18)

SERVER
2.9.6 NMEA transducers
NMEA compass, NMEA wind, NMEA log and NMEA depth
transducer may be used.
Green
Yellow
White
Screen
You must know which 2 cables from your other NMEA transducer carry the NMEA out
signal. If you have trouble call the dealer you bought your NMEA instrument from. He
should know the wiring colour and will probably sell the ”plug set” which may be
required. We do not have this information.
Connect NMEA out signal from the NMEA transducer to Server pin 10 (INPUT A).
Connect NMEA return signal from the NMEA transducer to Server pin 11 (INPUT B).
Note a: The Server allows only one NMEA transducer or instrument connected to the
input pins 10 and 11.
Note b: Make sure the calibration codes C73, C74, C75 and C76 (See Multi Control
Manual) for NMEA transducers are correctly set.
17