NComputing X550 EN - Manual (Page 18)

X550 User Guide
Page 18
Product Registration
The X550 PCI card contains an embedded hardware license which allow it to support up
to five access devices. When first installed, the X550 starts a trial license which permits
you to use full functionality of up to five attached access devices for the next 30 days.
Until you register, a reminder screen like the one shown below will be displayed at least
once a day on every user station. If you fail to register the X550 card with NComputing
(online or offline) within the 30-day trial period, the PCI card will cease to function.
Allowing the card’s trial license to expire will not prevent you from registering the card.
You can always launch the vSpace Registration application from the PC’s main screen,
via
Start > All Programs > vSpace > vSpace Registration
and then perform either online or offline registration. Full PCI card functionality will then
be restored once the card is successfully registered with NComputing.
NOTE: If you have two X550 cards installed in the system, the vSpace Registration
application will present the option of registering both cards at the same time.
NOTE: In addition to extending the X550 license beyond the 30-day trial period,
registration entitles you to 12 months of vSpace software updates and access to
NComputing technical support.
Select "vSpace Registration" from the Windows Start menu.