Nlynx NEWPORT 9000 - Manual (Page 7)

6
OPERATING INSTRUCTIONS
Place the Newport 9000 against a wall, near an electric outlet with 12-15 inches clearance on the front
and sides. It is best to place the unit where it will be out of any children's play area.
How to Start
Plug the unit into a standard 120V/60Hz outlet. Press the POWER ON/OFF button. The device starts
operating automatically and the negative-ion UV indicator will automatically turn on. Press POWER ON/OFF
again and the device will turn off.
Fan Modes
This Newport 9000 has five different fan modes to choose from. Please choose a proper
level of circulation according to indoor air quality and room size. As you press FAN,
the fan mode will change according to the number of times you press the button.
The LED will show the following sequence of modes:
QUIET LOW MED HI AUTO
Automatic Operation
Keep pressing the FAN button until the device runs under automatic operation
(the LED will show AUTO).
Under automatic operation, the device automatically switches to the proper
running modes (MED or LOW) according to the level of odor, dust, or irritants
in the air as detected by the sensor. As the air is purified, the device will auto-
matically switch back to LOW or QUIET modes.
Timed ON/OFF
Press AUTOTIMER button to set operation timing.
Under the AUTOTIMER function, the operation timing will be set according to
the number of times you press the AUTOTIMER button. The LED will show the
following sequence of timing:
1 HOUR 2 HOUR 8 HOUR
Locate the Unit
Advanced PureAir Newport 9000 Owner’s Manual TM