Nortel Networks Voice Mail - Manual (Page 10)

8 Norstar Voice Mail Voice Channel Upgrade
Voice Channel Upgrade Guide P0886617 Issue 1.0
Enabling the Voice Channel Upgrade Security Key Code
To enable the Voice Channel Upgrade Security Key Code:
Backing up the capabilities file
After you have increased the number of Voice Channels, you must back up the
Norstar Voice Mail capabilities file. This file contains all upgrade and capability
information about your Norstar Voice Mail system and must be restored along with
Norstar Voice Mail programming if a hard disk failure occurs.
Note: If this file is lost and your hard disk drive fails, all upgrades made to your
Norstar Voice Mail system will be lost. Ensure you store this backup in a
safe place.
Before you begin, ensure you have a blank IBM formatted 1.44 MB 3.5" floppy
disk. Label the Diskette
SEKUR/Capabilities File .
1. Press
ƒ · ° ‹
.
2. Enter the System Coordinator Mailbox number and
password and press OK .
3. Press
› ›
.
4. Press ADD .
5. Enter your Voice Channel Upgrade Security Key
Code and press OK .
6. After the additional Voice Channels are enabled, you
should back up the Norstar Voice Mail module’s
capabilities file.
7. Press
®
to end this programming session.
Log:
QUIT∫∫∫RETRY∫ ∫
Admin
MBOX∫∫∫AA∫ ∫ OTHR
Options∫admin
∫∫∫ VIEW
Key:
RETRY∫∫∫∫∫∫∫ ∫
Ports increased