Router side panel – NETGEAR DG834Gv5 User Manual
Page 8
4
Getting to Know Your Wireless Router
The ports on the router are color-coded to distinguish your Internet port from the other four ports
that connect to the wired computer(s) on your LAN. The rear panel contains the following
elements:
1. Wireless antenna
2. AC power adapter input
3. Power switch
4. Four local Ethernet RJ-45 LAN ports for connecting the router to the local computers
5. RJ-11 ADSL port for connecting the router to an ADSL line
Router Side Panel
The side panel of the router has a WPS button and a Wireless button
.
•
WPS. You can use the Wi-Fi Protected Setup (WPS) feature with clients on the network that
are Wi-Fi certified and WPA capable. See
“Using Push 'N' Connect (WPS) to Configure Your
•
Wireless. By default, the wireless modem router is set up to work as a wireless access point.
Pressing this button turns the wireless access point feature off and on. You can also do this
through the Wireless Settings screen (see the link to your User Manual on the Resource CD.)
•
Factory default settings. Pressing both buttons at the same time resets the unit the factory
default settings.
Figure 3
Wireless
WPS