Rear panel – Nokia MEDIAMASTER 9660S User Manual

Page 3

Advertising
background image

GB 4


Keep a clear space around the Mediamaster to allow for sufficient ventilation.
Do not cover the Mediamaster or place it on a unit that emits heat.

Ÿ Use a soft cloth and a mild solution of dish washing liquid to clean the casing.
Ÿ Never allow liquids, spray or other materials to come into contact with the inside of the

Mediamaster.

Ÿ Service should be carried out only at a Nokia authorized service center.
Ÿ Do not connect or modify cables when the Mediamaster is plugged in.
Ÿ Do not remove the cover.
Ÿ Do not allow the unit to be exposed to hot, cold or humid conditions.

Ÿ

Please note that the only way to isolate the Mediamaster completely from the 230 V mains supply

is to unplug the mains lead!







Rear panel

RS232

For a PC.

LNB input

Satellite dish
input
(F-connector).

LNB output

Satellite signal (IF) output
with loop through. For
connection to the other
satellite receiver if needed.

TV SCART

For the audio
/video input of the
TV set.

TV AERIAL

For a terrestrial
(conventional)
TV aerial.

VCR SCART
For connection to a
VCR or an analogue
satellite receiver.

VIDEO OUTPUT

Composite video
signal output for a
TV set.

AUDIO L R
Stereo outputs for

connection to a HiFi
system.

AC INLET

230 V AC
50 Hz

TV/VCR

For an RF-Cable
to the aerial
input of the TV
or VCR.

MODEM
For connection
to an external
MODEM

Advertising