Nokia MEDIAMASTER 9660S - Manual (Page 6)

GB 7
Refer to your video recorder manual for full instructions.
Ÿ Connect one SCART cable between the main
SCART socket on the TV and the TV SCART
socket on the Mediamaster.
Ÿ Connect another SCART cable between the VCR
and the VCR SCART socket on the Mediamaster.
Ÿ Connect the RF cable from the RF output on the
VCR to the TV aerial input on the TV.
Ÿ Connect the TV aerial to the RF input socket on the
VCR.
Ÿ Connect a SCART cable between the main SCART
socket on the TV and the TV SCART socket on the
Mediamaster.
Ÿ Connect an RF cable from the RF output on the
VCR to the TV aerial input on the TV.
Ÿ Connect an RF cable from the TV/VCR output on the
Mediamaster to the RF input socket on the VCR.
Ÿ Connect the TV aerial to the TV AERIAL input
socket on the Mediamaster.
Ÿ Connect a SCART cable between the main SCART
socket on the TV and the TV SCART socket on the
Mediamaster.
Ÿ Connect a SCART cable between the VCR and the
VCR SCART socket on the Mediamaster.
Ÿ Connect an RF cable from the RF output on the VCR
to the TV aerial input on the TV.
Ÿ Connect an RF cable from the RF output on the
Analogue receiver to the RF input socket on the VCR.
Ÿ Connect the TV aerial to the RF input socket on the
Analogue receiver.
In order to switch the signal from the dish between
the analogue and digital receivers, you need a
Universal Twin LNB.
Ÿ Cable A between output A on the LNB to the LNB socket on the analogue receiver.
Ÿ Cable B between output B on the LNB to the ANTENNA socket on the Mediamaster.
Both the VCR and the analogue satellite receiver must be tuned to different UHF channels (than the
Mediamaster) when using RF-connectors.
Connecting to a TV and a Video recorder
If Your VCR does not have a SCART connector
Connecting to an Analogue satellite receiver and
a Video recorder